Hi friends!!!
In our previous blogs we have discussed about Oxygen Concentrator, Medical Device Product Life Cycle, Telemedicine, Infant Incubator. Please check out for the link below.
Medical Device Product Life Cycle
Today we are going to discuss about Spirometer.
The Spirometer is a important medical device used to diagnose the lung condition. Being a healthcare professional, its important to know in detail about Spirometer
Let’s get into the topic.
WHAT IS SPIROMETER?
The spirometer is a medical device used to gain
understanding about how well the lung functions. The spirometer measures the
amount air inhaled and exhaled by the lungs and the speed at which the air is
inhaled and exhaled into the lungs. Spirometer is also called as respirometer. The
spirometer is used to understand conditions like asthma and also to understand
the recovery of lungs after a chronic lung disease. The study done using
spirometer is called spirometry. The spirometry is a type of pulmonary function
test. The spirometry is used to determine whether the lung conditions is
obstructive (exhalation is impaired) or restrictive (inhalation is impaired).
Image courtesy: Wikimedia commons
Licensed under: CC Share Alike
OBSTRUCTIVE LUNG DISEASE
In obstructive lung disease there is a difficulty in
exhaling and emptying the air in the lungs completely due to damage of the lungs
and narrowing of airways.
RESTRICTIVE LUNG DISEASE
The restrictive lung disease is a condition in which
there is a little air in the lungs and it does a poor job in transferring
oxygen into the blood.
HOW SPIROMETRY TEST IS PERFORMED?
1. Patient’s nostrils will be closed by placing a clip
onto the patient’s nose.
2. A hose attached with mouth piece at one end is given
to the patients. Then the patients are asked to seal the mouth piece with their
lips.
3. Patient’s have to take deep breathe in and breathe out
into the tube. This step is repeated atleast three times to verify the
consistency in patient’s breathing. The highest reading out of three is taken
as a final result.
4. There should not be any air leaks between patient’s
mouth and the mouth piece of the spirometer.
WHAT ARE THE COMPONENTS OF SPIROMETER?
The components of spirometer include mouthpiece, hose
and an electronic setup to measure air flow. The patient breaths using the
mouth piece, which generates air flow into the tube. This air is then converted
into an electrical signal using a sensor.
WORKING PRINCIPLE OF SPIROMETER
A jar is kept inverted in a chamber of water. The
height of jar in the water chamber is proportionate to the amount of air inside
the jar. One end of the jar is attached to the mouth piece through which the
patient breaths. The other end of the jar is connected to the weight via
pulleys. When the patient exhales via mouth piece, the pressure inside the jar
increases greater than atmospheric pressure which makes the height of the jar
increase above the water. When the patient inhales via mouth piece, the pressure
inside the jar decreases than the atmospheric pressure which makes the height
of the jar decrease in the water. When the jar moves inside the water chamber
due to the exhalation and inhalation of the patient, the weight attached to the
jar also moves accordingly. The movement of the jar is then converted into
electrical signal and displayed in the form of a graph called spirogram.
Image courtesy: Wikimedia commons
Licensed under: CC Share Alike
WHAT IS SPIROGRAM?
When spirometry test is performed, the result is shown
in a graph called spirogram. The volume of air inhaled and exhaled is shown
along X axis in litres and flow rate is shown along Y axis in litres per
second. The inspiration results are plotted below the X axis and the expiration
results are plotted above the X axis. Based on the shape and magnitude of the
graph, many airway obstruction diseases are diagnosed.
IMPORTANT PARAMETERS OF SPIROMETRY TEST
FORCED VITAL CAPACITY
The largest amount of air that can be forcefully
exhaled after breathing in as much as you can. The value which is lower than
normal forced vital capacity indicates a restricted breathing.
FORCED EXPIRATORY VOLUME
The amount of air that can be exhaled from lungs in
one second. The value lower than normal forced expiratory volume indicates significant
obstruction.
Now I hope you have acquired some knowledge about Spirometer. We will meet again with another valuable topic related to Biomedical Engineering, Medical Device, Healthcare.
NOTE: Dear friends!!!… Please do comment a topic related to Biomedical, so that we can discuss it in future blogs.
Check out for this blog about Computed Tomography, X ray, MRI scan, ECG.
COMPUTED TOMOGRAPHY|TECHNOLOGY|ARTIFACTS
x ray machine working principle
DON’T FORGET TO FOLLOW THIS BLOG PAGE
DROP YOUR MAIL ID TO GET IMMEDIATE UPDATES
If you find this blog post knowledgeable,
comment & share it with a friend!